The Skinny on Hook Types; To Which Do I Use
Many a different hook and design are on the market today so I choose to pick the ones I use the most with my favorite being that of the
Circle Hook,
to which is about all I use today:
And on and on…
O’Shaughnessy
This hook design, more often called a ‘J’ hook, is considered the basic industry standard hook design because it is the hook design in almost every illustration of a hook. It is a classic hook coming in all sizes, and is made in a variety of metals. It is the most widely used hook on the market today. Use this hook for all general-purpose fishing. Just make sure you purchase the right size for the fish you looking to either put in the box or practice CPR (Catch, Photograph & Release).
This hook design, more often called a ‘J’ hook, is considered the basic industry standard hook design because it is the hook design in almost every illustration of a hook. It is a classic hook coming in all sizes, and is made in a variety of metals. It is the most widely used hook on the market today. Use this hook for all general-purpose fishing. Just make sure you purchase the right size for the fish you looking to either put in the box or practice CPR (Catch, Photograph & Release).
When fishing with live bait, it is desirable to have short shank hook. First, a short shank allows the live bait to swim more naturally, and second, the shorter shank means the hook is more difficult for feeding fish to detect. Long shank hooks with live bait draw fewer strikes when presented on a mono or fluorocarbon leader; though on a wire king rig shank size only prohibits your baits movement not strikes.
Live Bait
These hooks are made from thin wire and range in size from a number 10 to a 4/0. They are very applicable for fish with soft mouths, like that of the Weakfish or for fishing with light tackle. Many Aberdeen hooks are bent to fit jig molds. Using light line means softer hook sets when using these hooks as the point and barb penetrate quickly. Generally designated as a freshwater hook, the Aberdeen is suitable for saltwater too but must be rinsed of salt, lubricated with a repellent such as Corrosion Block or they have a tendency to rust out in your box or bucket.
These hooks are made from thin wire and range in size from a number 10 to a 4/0. They are very applicable for fish with soft mouths, like that of the Weakfish or for fishing with light tackle. Many Aberdeen hooks are bent to fit jig molds. Using light line means softer hook sets when using these hooks as the point and barb penetrate quickly. Generally designated as a freshwater hook, the Aberdeen is suitable for saltwater too but must be rinsed of salt, lubricated with a repellent such as Corrosion Block or they have a tendency to rust out in your box or bucket.
Circle Hooks
The commercial industry has used a form of circle hooks on their catch boats. Using this type of hook attached to a long pole, commercial anglers would hooked it up with the fish, slinging them backwards in a quick release and return the pole for more from their encircled nets. It was easier in the early years of commercial Tuna harvesting to employ anglers to pole the fish rather than hoisting the nets because the nets were not strong enough to hold the weight suspended. Circle hooks, named for the unusual circle like bend, actually curves into the hook shank. If the bait is swallowed, the hook will come right back up the throat hooking the fish in its jaw line or mouth. As the fish turns away and runs, the hook turns toward the mouth of the fish. When the line pulls the shank of the hook out of the mouth, the hook naturally turns back toward the angler, and the fish hooks it up right in the corner of the mouth as the angler is slowly retrieving his line back onto the spool of his reel. Today these hooks are becoming more popular, where size limits mean releasing undersized fish; circle hooks offer a very high survival rate on released fish. The rule is – do not set the hook. It is so hard fro anglers to remember that rule. Setting the hook means pulling the hook and bait right out of the mouth of the fish. Let the fish turn, run, and simply start reeling. The hook sets itself with a slight lifting of the rod at a right angle to the run.
THE CIRCLE HOOK RULING;
JOINT AMENDMENT 27/14
The New Law States As Follows:
The law states you cannot use any hook except circle hooks when fishing for reef fish. The law states at least one de-hooking device is required and must be used to remove hooks embedded in gulf reef fish to leave minimum damage. The law states that at least one venting device is required and must be use to deflate the swim bladders of gulf reef fish to release the fish with minimum damage. NMFS is delaying until June 1 the effectiveness of these requirements to provide additional time for manufacturers and retail outlets to prepare for the demand. This also will provide more time for anglers to comply with these new gear requirements, though Joint Amendment 27/14 became effective Feb. 28, 2008.
No, 2010, all vessels (boats), to include Kayaks and canoes 16 feet or longer must have on-board a De-hooker, circle hooks for use in catching pelagic and a venting tool for relieving air trapped in the bladder from deep rising fish on a quick retrieve. It must be on board or you risk a hefty fine.
Hook Composition
Hooks are all made from various metals. Saltwater hooks were generally made from corrosion and rust resistant metal but since a number of anglers had the foresight to worry about our oceans futures, tinned hooks are now available for those of us that are esuriently anglers. Freshwater hooks can be made from wire.
Hooks are all made from various metals. Saltwater hooks were generally made from corrosion and rust resistant metal but since a number of anglers had the foresight to worry about our oceans futures, tinned hooks are now available for those of us that are esuriently anglers. Freshwater hooks can be made from wire.
Hook Parts
There are five basic parts to a hook: the point, gap. shank, eye, and barb with all of these parts working together in its design; different hook designs are made for different fishing applications. Knowing the sizing and what species you are angling for can help make your selection an easier task. The type of hook you select does make a difference, and hook selection depends on the fish being sought.
There are five basic parts to a hook: the point, gap. shank, eye, and barb with all of these parts working together in its design; different hook designs are made for different fishing applications. Knowing the sizing and what species you are angling for can help make your selection an easier task. The type of hook you select does make a difference, and hook selection depends on the fish being sought.
No comments:
Post a Comment